Administrator Guide

Layer 2 Switching Commands 450
clear green-mode statistics
Use the clear green-mode statistics command in Privileged Exec mode to
clear:
• The EEE LPI event count, and LPI duration
• The EEE LPI history table entries
• The Cumulative Power savings estimates
for a specified interface or for all the interfaces based upon the argument.
Syntax
clear green-mode statistics { interface-id | all}
• interface-id —An Ethernet interface identifier. See Interface Naming
Conventions
for interface representation.
• all —All Ethernet interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec
User Guidelines
This command has no user guidelines.
green-mode eee-lpi-history
Use the green-mode eee-lpi-history command in Global Configuration mode
to configure the Global EEE LPI history collection interval and buffer size.
This value is applied globally on all interfaces on the stack. LPI history is only
collected on combo ports when the copper port is enabled. Use the no form of
the command to set the sampling interval or max-samples values to the
default.
2CSNXXX_SWUM204.book Page 450 Monday, January 25, 2016 1:25 PM