Administrator Guide

Layer 2 Switching Commands 465
show gvrp configuration
Use the show gvrp configuration command in Privileged Exec mode to
display GVRP configuration information. Timer values are displayed. Other
data shows whether GVRP is enabled and which ports are running GVRP.
Syntax
show gvrp configuration [ interface-id ]
Default Configuration
This command has no default configuration.
Command Mode
Privileged Exec mode, Configuration mode and all Configuration submodes
User Guidelines
This command is valid for Ethernet and port-channel interfaces. If no
interface-id parameter is given, all interfaces are shown.
Example
The following example shows how to display GVRP configuration
information:
console# show gvrp configuration
Global GVRP Mode: Disabled
Join Leave LeaveAll Port VLAN
Interface Timer Timer Timer GVRP Mode Create Register
(centisecs) (centisecs) (centisecs) Forbid Forbid
----------- ----------- ----------- ----------- ----------- ------ ------
Gi1/0/1 20 60 1000 Disabled
Gi1/0/2 20 60 1000 Disabled
Gi1/0/3 20 60 1000 Disabled
Gi1/0/4 20 60 1000 Disabled
Gi1/0/5 20 60 1000 Disabled
Gi1/0/6 20 60 1000 Disabled
Gi1/0/7 20 60 1000 Disabled
Gi1/0/8 20 60 1000 Disabled
Gi1/0/9 20 60 1000 Disabled
Gi1/0/10 20 60 1000 Disabled
Gi1/0/11 20 60 1000 Disabled
2CSNXXX_SWUM204.book Page 465 Monday, January 25, 2016 1:25 PM