Administrator Guide

Layer 2 Switching Commands 556
Default Configuration
There is no default configuration for this command.
Command Modes
User Exec, Privileged Exec (all show modes)
User Guidelines
The filter type is one of the following values:
• ipv4-mac: User has configure MAC address filtering on this interface
• ip: IPv4 address filtering is configured on this interface
• N/A: No filtering is configured on the interface
Example
console(config-if-Gi1/0/5)#show ip verify
Interface Filter Type
----------- -----------
Gi1/0/1 ipv4
Gi1/0/2 ipv4-mac
Gi1/0/3 N/A
Gi1/0/4 N/A
Gi1/0/5 ipv4-mac
Gi1/0/6 N/A
Gi1/0/7 N/A
Gi1/0/8 N/A
Gi1/0/9 N/A
console(config-if-Gi1/0/5)#show ip verify interface gi1/0/5
Interface Filter Type
----------- -----------
Gi1/0/5 ipv6-mac
show ip verify source
Use the show ip verify source command in Privileged Exec mode to display
the bindings configured on a particular interface or all interfaces.
2CSNXXX_SWUM204.book Page 556 Monday, January 25, 2016 1:25 PM