Administrator Guide

Layer 2 Switching Commands 587
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
Gi1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
Gi1/0/2 Down Enabled Enabled Disabled Y
Gi1/0/3 Down Disabled Disabled Disabled 1,2 N
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
console# show lldp interface Gi1/0/1
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
Gi1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System Description, 3 –
System Capability
show lldp local-device
Use the show lldp local-device command in Privileged Exec mode to display
the advertised LLDP local data. This command can display summary
information or detail for each interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail — includes a detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Specify
either
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port
or
fortygigabitethernet unit/slot/port.
•
all — Shows lldp local device information on all interfaces.
Default Configuration
This command has no default configuration.
2CSNXXX_SWUM204.book Page 587 Monday, January 25, 2016 1:25 PM