Administrator Guide

Layer 2 Switching Commands 739
show interfaces random-detect
Use the show interfaces random-detect command in Privileged Exec mode to
display the global WRED policy or for an interface.
Syntax
show interfaces random-detect interface-id
• interface-id —Specify an optional interface type. Valid interfaces include
physical ports and port channels.
Default Configuration
For the N1500, the default drop probability is 8 – 0.781% and the default
minimum thresholds for Red/Yellow/Green colored packets are 40/30/20
percent respectively.
Intf Shaping Rate The maximum transmission bandwidth limit for
the interface as a whole. It is independent of any
per-queue maximum bandwidth values in effect
for the interface. This value is a configured value.
Queue Mgmt Type The queue depth management technique used for
all queues on this interface.
Queue An interface supports n queues numbered 0 to
(
n -1).The specific n value is platform-dependent.
Internal egress queue of the interface; queues 0–6
are available.
Minimum Bandwidth The minimum transmission bandwidth guarantee
for the queue, expressed as a percentage. A value of
0 means bandwidth is not guaranteed and the
queue operates using best-effort scheduling. This
value is a configured value.
Scheduler Type Indicates whether this queue is scheduled for
transmission using a strict priority or a weighted
scheme. This value is a configured value.
Parameter Description
2CSNXXX_SWUM204.book Page 739 Monday, January 25, 2016 1:25 PM