Administrator Guide

Security Commands 924
Syntax
attribute 8 include-in-access-req
no attribute 8 include-in-access-req
Default Configuration
By default, the Service-Type is not included in the Access-Request message
sent to the authentication server.
Command Mode
RADIUS Server Configuration
User Guidelines
There are no user guidelines for this command.
Command History
Introduced in version 6.3.0.1 firmware.
Example
console#conf
console(config)#radius-server host 4.3.2.1
console(config-auth-radius)#attribute 8 include-in-access-req
attribute 25
Use the attribute 25 command to enable the switch to send the RADIUS
Class attribute as supplied by the RADIUS server in accounting messages
sent to the specific accounting server.
Syntax
attribute 25 access-request include
no attribute 25 access-request include
Default Configuration
By default, the Service-Type is included in the accounting messages sent to
the accounting server.
2CSNXXX_SWUM204.book Page 924 Monday, January 25, 2016 1:25 PM