Setup Guide
194
スイッチの起動と設定
サンプルセッシ ョ ン
本項では、
Easy Setup Wizard
のセッションについて説明します。サン
プルセッションでは、以下の値が使用されています。
メモ :
スイッチを箱から出した時の状態、または工場出荷時の状態では、
ユーザー名、パスワード、
IP
アドレスは設定されていません。
•
SNMP
は無効です。
•
デフォルトユーザー名
root
が受け入れられ、パスワード
admin123
が入力済みである。入力中のパスワードは表示されま
せん。
•
OOB
管理インタフェースでは、
IP
アドレスの割り当てに
192.168.2.1
が使用されます。
メモ :
次の例では、ユーザーが選択できる箇所またはデフォルト値は
[ ]
で括られています。オプションを指定せずに
<Enter>
を押すと、デフォル
ト値を受け入れることになります。ヘルプテキストはかっこ内に示してあ
ります。
次の例には、上記の入力値を使用して
Dell Easy Setup Wizard
のサ
ンプルセッションを実行する際に表示される一連のプロンプトや応答が含
まれています。
POST
が完了してスイッチが起動すると、次のテキストが表示されます。
(Unit 1-Waiting to select management unit)>
Applying Global configuration, please wait...
Welcome to Dell Easy Setup Wizard
The Setup Wizard guides you through the initial switch
configuration, and gets you up and running as quickly
as possible. You can skip the setup wizard, and enter
CLI mode to manually configure the switch. You must
respond to the next question to run the setup wizard
within 60 seconds, otherwise the system will continue
with normal operation using the default system
configuration. Note: You can exit the setup wizard at
any point by entering [ctrl+z].
Would you like to run the setup wizard (you must
answer this question within 60 seconds)? [Y/N] y