Setup Guide
Table Of Contents
- Getting Started Guide
- 使用入门指南
- 入門指南
- Guide de mise en route
- Handbuch zum Einstieg
- Panduan Pengaktifan
- はじめに
- 시작 안내서
- Guia de Primeiros Passos
- Руководство по началу работы
- Guía de introducción
- Başlangıç Kılavuzu
- מדריך תחילת עבודה
![](/manual/dell/powerswitch-n4000-series/setup-guide-russian/images/img-19.png)
18
Installation
2
For each rail, attach the front and rear flanges to the post flanges with two
user-supplied screws at each end. See
Figure 6, item 2 on page 18.
Figure 6. Four-post Threaded Configuration
Installing the Switch
The switch may be mounted in the 1U front-rack and 1U two-post (flush and
center) configurations. The following is an example of 1U front-rack
configuration. The 1U two-post (flush and center) configurations, you can
slide the switch into the rails in the same manner as the four-post
configurations.