Users Guide

114 Hardware Overview
The Dell EMC Networking N1124-ON front panel provides 24
10/100/1000BASE-T Ethernet RJ-45 ports capable of full and half duplex
operation, and four SFP+ ports. The N1124P-ON supports six PoE+ or 12
PoE ports on Gigabit Ethernet ports 5-16. Dell EMC-qualified SFP+
transceivers are sold separately.
The Dell EMC Networking N1148-ON front panel provides 48
10/100/1000BASE-T Ethernet RJ-45 ports capable of full and half duplex
operation, and four SFP+ ports. The N1148P-ON supports twelve PoE+ or
24 PoE ports on Gigabit Ethernet ports 1-24. Dell EMC-qualified SFP+
transceivers are sold separately.
Figure 3-1. Dell EMC Networking N1108P-ON Switch (Front Panel)
Figure 3-2. Dell EMC Networking N1148P-ON Switch (Front Panel)
Console Port
The console port provides serial communication capabilities, which allows
communication using RS-232 protocol. The micro-USB port provides a direct
connection to the switch and allows access to the CLI from a console
terminal connected to the port through the provided USB cable (with a male
USB micro B to male USB type A connector).
8 10/100/1000BASE-T Ports
Console Port
USB Port
2 100/1000BASE-T Uplink Ports
2 SFP Ports
24 10/100/1000BASE-T Ports 4 SFP+ Ports
Console Port
USB Port
24 10/100/1000BASE-T Ports