Users Guide

348 Authentication, Authorization, and Accounting
To change the administrative port control:
1 Open the Dot1x Authentication page.
2 Click Show All.
The Dot1x Authentication Table displays.
3 Scroll to the right side of the table and select the Edit check box for each
port to configure. Change Admin Interface Control to Authorized,
Unauthorized, MAC-based, or Automode as needed for chosen ports.
Only MAC-based and Automode actually use 802.1X to authenticate.
Authorized and Unauthorized are manual overrides.
4 Click Apply.
Admin Port Control is updated for the specified ports, and the device is
updated.
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the Authenticated Users page, click Switching  Network
Security  Authenticated Users in the navigation panel.
Figure 10-6. Network Security Authenticated Users
Port Access Control Configuration
Use the Port Access Control Configuration page to globally enable or disable
RADIUS-assigned VLANs and to enable Monitor Mode to help troubleshoot
802.1X configuration issues.