Deployment Guide

35 Dell EMC Solutions for Microsoft Azure Stack HCI Networking Guide
8.2 VLT validation commands
8.2.1 show vlt domain_id
This command is used to validate the VLT configuration status. The Role for one switch in the VLT pair is
primary, and its peer switch, not shown, is assigned the secondary role. The VLTi Link Status and
VLT Peer Status must both be up.
S5248F-Leaf1A# show vlt 127
Domain ID : 127
Unit ID : 1
Role : primary
Version : 2.0
Local System MAC address : 3c:2c:30:10:3a:00
Role priority : 32768
VLT MAC address : 3c:2c:30:10:3a:00
IP address : fda5:74c8:b79e:1::1
Delay-Restore timer : 90 seconds
Peer-Routing : Enabled
Peer-Routing-Timeout timer : 0 seconds
VLTi Link Status
port-channel1000 : up
VLT Peer Unit ID System MAC Address Status IP Address Version
--------------------------------------------------------------------------------
2 3c:2c:30:10:34:00 up fda5:74c8:b79e:1::2 2.0
8.2.2 show vlt domain_id backup-link
This command is used to verify VLT peers are communicating on the backup link over the OOB management
network. The Destination is the management IP address of the peer. The Peer HeartBeat status
must be Up.
S5248F-Leaf1A# show vlt 127 backup-link
VLT Backup Link
------------------------
Destination : 100.67.168.31
Peer Heartbeat status : Up
Heartbeat interval : 30
Heartbeat timeout : 90
Destination VRF : default