Service Manual

Despite removing an OSPF process globally, the OSPF process is not completely removed from the BGP
conguration.
Related Commands default-information originate — generates a default route into the OSPF routing domain.
redistribute bgp
Redistribute BGP routing information throughout the OSPF instance.
S3048–ON
Syntax
redistribute bgp as number [metric metric-value] | [metric-type type-value]
| [tag tag-value]
To disable redistribution, use the no redistribute bgp as number [metric metric-value]
| [metric-type type-value] [route-map map-name] [tag tag-value] command.
Parameters
as number Enter the autonomous system number. The range is from 1 to 65535.
metric metric-value (OPTIONAL) Enter the keyword metric then the metric-value number. The range
is from 0 to16777214.
metric-type type-
value
(OPTIONAL) Enter the keywords metric-type then one of the following:
• 1 = for OSPF External type 1
• 2 = for OSPF External type 2
route-map map-
name
(OPTIONAL) Enter the keywords route-map then the name of the route map.
tag tag-value (OPTIONAL) Enter the keyword tag to set the tag for routes redistributed into
OSPF. The range is from 0 to 4294967295.
Defaults none
Command Modes ROUTER OSPF
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.3 Added Route Map for BGP Redistribution to OSPF.
7.8.1.0 Added support for Multi-Process OSPF.
7.6.1.0 Introduced on the S-Series.
1018
Open Shortest Path First (OSPFv2 and OSPFv3)