Service Manual
console 0 Enter the keyword console 0 to congure the console port. The console option
for the S-Series is <0-0>.
vty number Enter the keyword vty then a number from 0 to 9 to congure a virtual terminal
line for remote sessions. The system supports 10 remote sessions.
end-number (OPTIONAL) Enter a number from 1 to 9 as the last virtual terminal line to
congure. You can congure multiple lines at one time.
Defaults Not congured
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series Original command
Usage Information You cannot delete a terminal connection.
Related Commands
access-class — restricts the incoming connections to a particular IP address in an IP access control list
(ACL).
password — species a password for users on terminal lines.
login concurrent-session
Congures the limit of concurrent sessions for all users on console and virtual terminal lines.
Syntax
login concurrent-session {limit number-of-sessions | clear—line enable}
no login concurrent-session {limit number-of-sessions | clear—line enable}
Control and Monitoring
109