Service Manual

show cam pbr
Display the PBR CAM content.
Syntax
show cam pbr {[interface interface] | stack—unit slot-number port-set number]} [summary]
Parameters
interface interface Enter the keyword interface then the name of the interface.
stack–unit number Enter the keyword stack-unit then the slot number.
port-set number Enter the keywords port-set then the port-pipe number.
summary Enter the keyword summary to view only the total number of CAM entries.
Defaults none
Command Modes EXEC
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048–ON.
9.7(0.0) Introduced on the S6000-ON.
9.4(0.0) Introduced on the S4810, S4820T, S6000, and Z9000.
Usage Information The show cam pbr command displays the PBR CAM content.
Example
Dell#show cam pbr stack-unit 1 port-set 0
TCP Flag: Bit 5 - URG, Bit 4 - ACK, Bit 3 - PSH, Bit 2 - RST, Bit 1 - SYN, Bit 0 - FIN
Cam Port VlanID Proto Tcp Src Dst SrcIp DstIp Next-hop Egress
Index Flag Port Port MAC Port
------------------------------------------------------------------------------------------------------------------------------------------
00000 5 N/A IP 0x0 0 0 22.22.2.22/32 33.33.3.0/24 00:01:e8:8a:fd:76 0/0
00001 5 N/A 145 0x0 0 0 0.0.0.0/0 44.4.4.4/32 00:01:e8:8a:fd:76 Vl 100(0/1)
00002 5 N/A TCP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00003 5 N/A UDP 0x0 0 0 55.1.3.0/24 66.6.6.6/32 00:01:e8:8a:fd:76 Po 128
00004 5 N/A IP 0x0 0 0 0.0.0.0/0 0.0.0.0/0 00:01:e8:8a:fd:76 Vl 1020(Po
100)
Dell#
Related Commands
• ip redirect-group – applies a redirect group to an interface.
• show ip redirect-list – displays the redirect-list conguration.
show ip redirect-list
View the redirect list conguration and the interfaces it is applied to.
Syntax
show ip redirect-list redirect-list-name
1092
Policy-based Routing (PBR)