Service Manual
bridge-priority value Enter the keywords bridge-priority then the bridge priority value in
increments of 4096. The range is from 0 to 61440. The default is 32768.
Defaults 32768
Command Modes CONFIGURATION (conf-pvst)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
6.2.1.1 Introduced.
Related Commands
vlan forward-delay — changes the time interval before Dell Networking OS transitions to the Forwarding
state.
vlan hello-time — change the time interval between BPDUs.
vlan max-age — changes the time interval before PVST+ refreshes.
show spanning-tree pvst — displays the PVST+ conguration.
vlan forward-delay
Set the amount of time the interface waits in the Listening state and the Learning state before transitioning to the Forwarding state.
S3048
Syntax
vlan vlan-range forward-delay seconds
To return to the default setting, use the no vlan forward-delay command.
Parameters
vlan vlan-range Enter the keyword vlan then the VLAN numbers. The range is from 1 to 4094.
forward-delay
seconds
Enter the keywords forward-delay then the time interval, in seconds, that Dell
Networking OS waits before transitioning PVST+ to the forwarding state. The
range is from 4 to 30 seconds. The default is 15 seconds.
1148
Per-VLAN Spanning Tree Plus (PVST+)