Service Manual

rate-shape
Shape trac output as part of the designated policy.
S3048–ON
Syntax
rate-shape [kbps] rate [burst-KB]
Parameters
kbps Enter the keyword kbps to specify the rate limit in Kilobits per second (Kbps).
Make the following value a multiple of 64. The range is from 0 to 40000000. The
default granularity is Megabits per second (Mbps).
rate The range is from 10 to 40000.
burst-KB (OPTIONAL) Enter the burst size in KB. The range is from 0 to 40000. The default
is 100.
Defaults Burst size is 10KB. Granularity for rate is Mbps unless you use the kbps option.
Command Modes QOS-POLICY-OUT
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information On 40-port 10G stack-unit if the trac is shaped between 64 and 1000 Kbs, for some values, the shaped
rate is much less than the value congured.
Related Commands
rate shape — shapes trac output as part of the designated policy.
qos-policy-output — creates a QoS output policy.
service-policy input
Apply an input policy map to the selected interface.
S3048–ON
Syntax
service-policy input policy-map-name [layer2]
To remove the input policy map from the interface, use the no service-policy input policy-
map-name [layer2] command.
1176
Quality of Service (QoS)