Service Manual

The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Usage Information A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces.
Related Commands
policy-map-output — creates an output policy map.
service-queue
Assign a class map and QoS policy to dierent queues.
S3048–ON
Syntax
service-queue queue-id [class-map class-map-name] [qos-policy qos-policy-
name]
To remove the queue assignment, use the no service-queue queue-id [class-map class-
map-name] [qos-policy qos-policy-name] command.
Parameters
queue-id Enter the value used to identify a queue. The range is from 0 to 7.
class-map class-
map-name
(OPTIONAL) Enter the keyword class-map then the class map name assigned to
the queue in character format (32 character maximum).
NOTE: This option is available under policy-map-input only.
qos-policy qos-
policy-name
(OPTIONAL) Enter the keywords qos-policy then the QoS policy name
assigned to the queue in text format (32 characters maximum). This species the
input QoS policy assigned to the queue under policy-map-input and output
QoS policy under
policy-map-output context.
Defaults none
Command Modes CONFIGURATION (conf-policy-map-in and conf-policy-map-out)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
1178
Quality of Service (QoS)