Service Manual

Defaults none
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
Example
Dell#show qos qos-policy-output
Qos-policy-output qosOut
Rate-limit 50 50 peak 50 50
Wred yellow 1
Wred green 1
show qos statistics
View QoS statistics.
S3048–ON
Syntax
show qos statistics {egress—queue [interface]} | {wred-profile [interface]}
| [interface]
Parameters
egress-queue
interface
Enter the keyword egress-queue to display the egress-queue statistics and
optionally one of the following keywords and slot/port or number information.
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
wred-prole
interface
Enter the keywords wred-profile and optionally one of the following keywords
and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
interface Enter one of the following keywords and slot/port or number information:
Quality of Service (QoS)
1185