Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1181

Version Description

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Example

Dell#show qos wred-profile

Wred-profile-name min-threshold max-threshold max-drop-rate

wred_drop 0 0 100

wred_gig_y 467 4671 100

wred_gig_g 467 4671 50

wred_teng_y 467 4671 50

wred_teng_g 467 4671 25

test cam-usage

Check the Input Policy Map conguration for the CAM usage.

S3048–ON

Syntax

test cam-usage service-policy input policy-map stack-unit {[number port-set

portpipe number] | [all]}

Parameters

policy-map Enter the policy map name.

stack-unitnumber (OPTIONAL) Enter the keyword stack-unit then the stack-unit slot number.

port-set portpipe

number

Enter the keywords port-set then the stack-unit port pipe number. The range is

from 0 or 1.

stack-unit all (OPTIONAL) Enter the keywords stack-unit all to indicate all stack-unit.

Defaults none

Command Modes EXEC

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.