Service Manual

Parameters
connected Enter the keyword connected to specify that information from active routes on
interfaces is redistributed.
static Enter the keyword static to specify that information from static routes is
redistributed.
Defaults Not congured.
Command Modes ROUTER RIP
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
pre- 6.2.1.1 Introduced on the E-Series.
Usage Information To redistribute the default route (0.0.0.0/0), congure the default-information originate
command.
Related Commands
default-information originate — generates a default route for RIP trac.
redistribute isis
Redistribute routing information from an IS-IS instance.
S3048–ON
Syntax
redistribute isis [tag] [level-1 | level-1-2 | level-2] [metric metric-
value] [route-map map-name]
To disable redistribution, use the no redistribute isis [tag] [level-1 | level-1-2 |
level-2] [metric metric-value] [route-map map-name] command.
Parameters
tag (OPTIONAL) Enter the name of the IS-IS routing process.
level-1 (OPTIONAL) Enter the keywords level-1 to redistribute only IS-IS Level-1
routes.
1216
Routing Information Protocol (RIP)