Service Manual

• AUX: the range is from 1 to 300 seconds, the default is 0 seconds (no
timeout).
Defaults See the defaults settings shown in Parameters.
Command Modes LINE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.1.1.0 Introduced on the E-Series.
Usage Information The software measures the period of inactivity dened in this command as the period between consecutive
keystrokes. For example, if your password is “password” you can enter “p” and wait 29 seconds to enter the
next letter.
username
Establish an authentication system based on user names.
Syntax
username name [access-class access-list-name] [nopassword | {password |
secret} [encryption-type] password] [privilege level] [role role-name]
If you do not want a specic user to enter a password, use the nopassword option.
To delete authentication for a user, use the no username name command.
Parameters
name Enter a text string for the name of the user up to 63 characters.
access-class
access-list-name
Enter the keywords access-class then the name of a congured access
control list (either an IP access control list or MAC access control list).
nopassword Enter the keyword nopassword to specify that the user should not enter a
password.
password Enter the keyword password then the encryption-type or the password.
secret Enter the keyword secret then the encryption-type or the password.
encryption-type Enter an encryption type for the password that you enter.
Security
1279