Service Manual
radius-server key
Congure a key for all RADIUS communications between the switch and the RADIUS host server.
Syntax
radius-server key [encryption-type] key
To delete a password, use the no radius-server key command.
Parameters
encryption-type (OPTIONAL) Enter either zero (0) or 7 as the encryption type for the key entered.
The options are:
• 0 is the default and means the key is not encrypted and stored as clear text.
• 7 means that the key is encrypted and hidden.
key Enter a string that is the key to be exchanged between the switch and RADIUS
servers. It can be up to 42 characters long.
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.7.1.0 Authentication key length increased to 42 characters.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-6.2.1.0 Introduced on the E-Series.
Usage Information
The key congured on the switch must match the key congured on the RADIUS server daemon.
If you congure the key parameter in the radius-server host command, the key congured with the
radius-server key command is the default key for all RADIUS communications.
Related Commands radius-server host — congures a RADIUS host.
Security
1287