Service Manual

Dell#
Related Commands ip ssh rsa-authentication (Cong) — congures the RSA authorized keys.
ssh
Open an SSH connection specifying the hostname, username, encryption cipher, HMAC algorithm, port number, and version of the
SSH client.
Syntax
NOTE: Some of the parameters in this command require licensing to access. For more information,
contact your Dell Networking representative.
ssh {hostname | ipv4 address | ipv6 address} [-c encryption cipher | -l
username | -m HMAC algorithm | -p port-number | -v {1 | 2}]
Parameters
hostname (OPTIONAL) Enter the IP address or the host name of the remote device.
vrf instance (OPTIONAL) E-Series Only: Enter the keyword vrf then the VRF Instance name
to open an SSH connection to that instance.
ipv4 address (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D.
ipv6-address prex-
length
(OPTIONAL) Enter the IPv6 address in the x:x:x:x::x format then the prex length
in the /x format. The range is from /0 to /128.
NOTE: The :: notation species successive hexadecimal elds of zeros.
-c encryption cipher Enable the “FIPS mode enable", this mode will support only v2 client.
"no ps mode enable"(disable) will support v1 & v2 client. This comment is
applicable for both ciphers & HMAC algorithms:
• 3des-cbc: Force ssh to use 3des-cbc encryption cipher.
•
aes128-cbc : Force ssh to use aes128-cbc encryption cipher
• aes192-cbc : Force ssh to use aes192-cbc encryption cipher
• aes256-cbc : Force ssh to use aes256-cbc encryption cipher
• aes128-ctr : Force ssh to use aes128-ctr encryption cipher
• aes192-ctr : Force ssh to use aes192-ctr encryption cipher
• aes256-ctr : Force ssh to use aes256-ctr encryption cipher
-l username (OPTIONAL) Enter the keyword -l then the user name used in this SSH session.
The default is the user name of the user associated with the terminal.
-m HMAC
algorithm
Enter one of the following HMAC algorithms to use. (For v2 clients only):
"no ps mode enable"(disable) will support v1 & v2 client.
• hmac-md5: Force ssh to use hmac-md5 HMAC algorithm.
• hmac-md5-96: Force ssh to use hmac-md5-96 HMAC algorithm.
• hmac-sha1: Force ssh to use hmac-sha1 HMAC algorithm.
• hmac-sha1-96 : Force ssh to use hmac-sha1-96 HMAC algorithm.
• hmac-sha2-256 : Force ssh to use hmac-sha2-256 HMAC algorithm.
• hmac-sha2-256-96: Force ssh to use hmac-sha2-256-96 HMAC algorithm.
1326
Security