Service Manual

role
Changes command permissions for roles.
Syntax role mode { { { addrole | deleterole } role-name } | reset } command
To delete access to a command, use the no role mode role-name
Parameters
mode
Enter one of the following keywords as the mode for which you are controlling
access:
congure for CONFIGURATION mode
exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add
or delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add
or delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3
system dened roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9000, S6000, S4820T, S4810, and MXL.
Related Commands userrole
show role
Display information on permissions assigned to a command, including user role and/or permission level.
Syntax
show role mode {mode} {command}
1336
Security