Service Manual

Defaults Disabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.2.1.0 Introduced on S-Series Stacking.
8.1.1.0 Introduced on the E-Series ExaScale.
7.7.1.0 Introduced on the S-Series.
7.6.1.0 Introduced on the C-Series.
7.4.1.0 Introduced on the E-Series.
Usage Information Dell Networking OS enhances the sow implementation for real time trac analysis on the E-Series to
provide extended gateway information in cases where the destination IP addresses are learned by dierent
routing protocols and for cases where the destination is reachable over ECMP.
Related Commands
show sow — displays the sFlow conguration.
sow max-header-size extended
Set the maximum header size of a packet to 256 bytes.
Syntax
sflow max-header-size extended
To reset the maximum header size of a packet, use the[no] sflow max-header-size extended
command.
Parameters
extended Enter the keyword extended to copy 256 bytes from the sample packets to
sFlow datagram.
Defaults 128 bytes
Command Modes
CONFIGURATION
INTERFACE
1350
sFlow