Service Manual
Version Description
8.3.1.0 Added the members option.
Usage Information Enabling this command keeps the failed switch in the Failed state. The switch does not reboot until it is
manually rebooted. When enabled, it is not displayed in the running-cong. When disabled, it is displayed in
the running-cong.
Related Commands show redundancy — displays the current redundancy status.
redundancy force-failover stack-unit
Force the standby unit in the stack to become the management unit.
Syntax
redundancy force-failover stack-unit
Parameters
stack-unit Enter the stack unit. The range is from 1 to 6.
Defaults Not enabled.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.7.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
8.3.1.0 Added the members option.
redundancy protocol
Enable hitless failover for a protocol.
Syntax
redundancy protocol
Protocols
lacp Enter the LACP protocol
xstp Enter one of the following protocols: STP, RSTP, MSTP, PVST.
Defaults Not enabled.
Command Modes CONFIGURATION
Stacking
1405