Service Manual
flash: Save to local ash drive (flash://filename. A maximum of 20
characters.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced save to the le options.
7.6.1.0 Introduced on the S-Series.
Usage Information
Without the page or stack-unit option, the command output is continuous. To interrupt the
command output, use Ctrl-z.
The save option works with other ltering commands. This allows you to save specic information of a
show command. The save entry must always be the last option. For example: Dell#show tech-
support |grep regular-expression |except regular-expression | find regular-
expression | save flash://result
This display output is an accumulation of the same information that is displayed when you execute one of
the following show commands:
• show version
• show clock
• show running-config
• show system stack-ports
• show interfaces
• show process memory
• show process cpu
• show file system
• show system
• show environment
• show ip traffic
• show ip management route
• show ip route summary
• show Inventory
• show log summary
• show command-history (last 20 commands)
144
Control and Monitoring