Service Manual

Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Usage Information
You can specify the matching criteria only after dening a route-map. Before using this command, you must
enter the route map mode using the route-map route-map-name command. The match criteria that you
specify is associated with the route-map that you dene.
The export-target and import-target support only the match protocol and match prex-list options. Other
options that are congured in the route-maps are ignored.
Related Commands ipv6 route-import – imports IPv6 routes from another VRF.
redistribute
Redistributes leaked or exported routes corresponding to specic protocols.
Syntax
redistribute {imported-bgp | import-ospf | import-isis}
Parameters
imported-bgp Enter the keyword imported-bgp to redistribute leaked routes that are learnt using
the BGP protocol.
imported-ospf Enter the keyword imported-ospf to redistribute leaked routes that are learnt using
the OSPF protocol.
imported-isis Enter the keyword imported-isis to redistribute leaked routes that are learnt using
the ISIS protocol.
route-map Enter the name of the route-map to specify the ltering criteria for imported
routes.
Defaults N/A
Command Modes
CONFIGURATION
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S5000, S6000, S6000–ON, and Z9500.
Related Commands ip route-import – imports routes from another VRF.
interface management
Associates a management port with a management VRF.
Syntax
interface management
Virtual Routing and Forwarding (VRF)
1487