Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

1521

Command Modes VRRP

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.6.1.0 Introduced on the S-Series.

7.5.1.0 Introduced on the C-Series.

6.2.1.1 Introduced on the E-Series.

priority

Specify a VRRP priority value for the VRRP group. The VRRP protocol uses this value during the MASTER election process.

Syntax

priority priority

To return to the default value, use the no priority command.

Parameters

priority Enter a number as the priority. Enter 255 only if the router’s virtual address is the

same as the interface’s primary IP address (that is, the router is the OWNER). The

range is from 1 to 255. The default is 100.

Defaults 100