Service Manual

Vlan Members
Test - test -
1-100
The following sample output is displayed when using the show acl-vlan-group group-name option.
NOTE: The access list name is truncated.
Dell#show acl-vlan-group TestGroupSeventeenTwenty
Group Name Egress IP Acl Ingress IP Acl Ingress IPV6
Acl Vlan Members Test -
test - 1-100
The following sample output shows the line-by-line style display when using the show acl-vlan-group
detail option.
NOTE: No group or access list names are truncated
Dell#show acl-vlan-group detail
Group Name :
Test
Egress IP Acl :
-
Ingress IP Acl :
test
Ingress IPV6 Acl :
-
Vlan Members :
1-100
show cam-acl-vlan
Display the number of ow processor (FP) blocks that is allocated for the dierent VLAN services.
Syntax
show cam-acl-vlan
Command Modes EXEC Privilege
Command History
Version 9.3.(0.0) Introduced on the S4810, S4820T, Z9000 and MXL platforms.
Usage Information After CAM conguration for ACL VLAN groups is performed, you must reboot the system to enable the
settings to be stored in nonvolatile storage. During the initialization of CAM, the chassis manager reads the
NVRAM and allocates the dynamic VCAP regions.
The following table describes the output elds of this show command:
Field Description
Chassis Vlan Cam ACL Details about the CAM blocks allocated for ACLs
for various VLAN operations at a system-wide,
global level.
Stack Unit <number> Details about the CAM blocks allocated for ACLs
for various VLAN operations for a particular stack
unit.
Current Settings(in block sizes) Information about the number of FP blocks that are
currently in use or allocated.
Access Control List (ACL) VLAN Groups and Content Addressable Memory (CAM)
313