Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

371

372

373

374

375

376

377

378

379

380

Version Description

9.8(0.0) Introduced on the S3048–ON and S4048–ON.

9.7(0.0) Introduced on the S6000–ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.8.0 Support from 2 to 64 paths on the S4810. Command syntax changed to max-

path (was maximum-paths).

8.3.7.0 Introduced on the S4810.

7.8.1.0 Introduced on the S-Series.

7.7.1.0 Introduced on the C-Series.

Usage Information If you enable this command, use the clear ip bgp * command to recompute the best path.

neighbor activate

This command allows the specied neighbor/peer group to be enabled for the current AFI/SAFI (Address Family Identier/

Subsequent Address Family Identier).

Syntax

neighbor [ip-address | peer-group-name] activate

To disable, use the no neighbor [ip-address | peer-group-name] activate command.

Parameters

ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.

peer-group-name (OPTIONAL) Enter the name of the peer group.

activate Enter the keyword activate to enable the neighbor/peer group in the new AFI/

SAFI.

Defaults Disabled

Command Modes CONFIGURATION-ROUTER-BGP-ADDRESS FAMILY

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.