Service Manual

Down State/Pfx
172.16.0.2 200 10 8 0 0 0
00:05:34 2
192.168.10.2 100 0 22 0 0 0
00:00:00 (shut)
Dell#
show running-cong bgp
To display the current BGP conguration, use this feature.
Syntax
show running-config bgp
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048–ON and S4048–ON.
9.7(0.0) Introduced on the S6000–ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.6.1.0 Introduced on the E-Series.
Example
Dell#show running-config bgp
!
router bgp 100
network 1.1.11.1/32
network 1.1.12.1/32
network 1.1.13.1/32
neighbor 10.1.1.2 remote-as 200
neighbor 10.1.1.2 no shutdown
Dell#
timers bgp
Adjust the BGP Keep Alive and Hold Time timers.
Syntax
timers bgp keepalive holdtime
To return to the default, use the no timers bgp command.
436
Border Gateway Protocol