Service Manual
12
Control Plane Policing (CoPP)
The CoPP commands are supported on the Dell Networking platform.
control-plane-cpuqos
To manage control-plane trac, enter control-plane mode and congure the switch.
Syntax
control-plane-cpuqos
Defaults Not congured.
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.8.0 Introduced on the S4810.
service-policy rate-limit-cpu-queues
Apply a policy map for the system to rate limit control trac on a per-queue basis.
Syntax
service-policy rate-limit-cpu-queues policy-name
Parameters
policy-name Enter the service-policy name, using a string up to 32 characters.
Defaults Not congured.
458
Control Plane Policing (CoPP)