Service Manual

Version Description
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related Commands show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
clear hardware system-ow
Clear system-ow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit number port-set 0–0 counters
Parameters
stack-unit number Enter the keywords stack-unit then a number to select a particular stack
member and then enter one of the following command options to clear a specic
collection of data. The range is from 1 to 6.
port-set 0–0
counters
Enter the keywords port-set along with a port-pipe number, then the keyword
counters to clear the system-ow counters on the selected port-pipe. The range is
from 0 to 0.
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.0 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
Related Commands show hardware stack-unit — displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
clear hardware vlan-counters
Clear VLAN statistics.
Syntax
clear hardware vlan-couters vlan-id
Parameters
vlan-id Enter the interface VLAN number. The range is from 1 to 4094.
470
Debugging and Diagnostics