Service Manual
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.7(0.0) Introduced this command.
Example
Dell#show hardware vlan-counters 1
Counters for vlanid: 1
------------------------
Total number of inpackets: 0
Total number of inbytes: 0
Total number of outpackets: 0
Total number of outbytes: 0
Dell#
Related Commands
clear hardware system-ow — clears the statistics from selected hardware components.
show hardware drops
Displays internal drops on the specied interface or for a range of interface.
Syntax
show hardware drops interface interface
Parameters
interface
Enter any of the following keywords and slot/port or slot/port-range or number
information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
drops
Enter the keyword drops to display internal drops.
Command Modes
EXEC
EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Removed the keywords stack-unit. Introduced on the Z9500, S3048-ON, and
S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.2(0.2) Modied the drops keyword range, unit keyword range and added the buffer
and cpu management statistics options.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
Debugging and Diagnostics
491