Service Manual

Version Description
9.6(0.0)
Added the keywords discard-counters, interface, and the variable
interface on the S4810, S4820T, S5000, S6000, Z9000, Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
The following example shows how to clear the discard counters globally:
Dell> clear ip dhcp snooping source-address-validation discard-counters
The following example shows how to clear the discard counters on an interface:
Dell> clear ip dhcp snooping source-address-validation discard-counters
interface Gibabitethernet 1/10
The following example shows how to clear the discard counters on a port channel interface:
Dell> clear ip dhcp snooping source-address-validation discard-counters
interface portchannel 1
Related Commands show ip dhcp snooping — displays the contents of the DHCP binding table.
clear ipv6 dhcp snooping binding
Clear all the DHCPv6 snooping binding database entries.
Syntax
clear ipv6 dhcp snooping binding
Defaults none
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command-Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S4810, S4820T, S6000 and Z-Series.
Example
Dell# clear ipv6 dhcp snooping?
binding Clear the snooping binding database
Dynamic Host Conguration Protocol (DHCP)
507