Service Manual

To undo the domain name conguration corresponding to a specic VRF, use the no ip domain-name
[vrf vrf-name] name command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to congure the
domain corresponding to that VRF.
name Enter the name of the domain to be appended to the in complete DNS requests
corresponding to the specied VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to congure a domain name corresponding to a VRF. This domain is appended to the in
complete DNS requests corresponding to the specied VRF.
Example
Dell(conf)#ip domain-name vrf jay dell.com
ip domain-list
Adds a domain name to the DNS list. This domain name is appended to incomplete host names in DNS requests corresponding to a
specic VRF.
Syntax
ip domain-list [vrf vrf-name] name
To remove a domain name from DNS list, use the no ip domain-list [vrf vrf-name] name
command.
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to add a domain
name to the DNS list corresponding to that VRF.
name Enter the name of the domain to be appended to the DNS list corresponding to the
VRF.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Dynamic Host Conguration Protocol (DHCP)
523