Service Manual
clear host
Removes one or all dynamically learned host table entries for a specic VRF.
Syntax
clear host [vrf vrf-name] {* | host-name}
Parameters
vrf vrf-name (Optional) Enter the key word vrf and then the name of the VRF to delete
dynamically learned host table entries corresponding to that VRF.
host-name Enter the name of the host corresponding to which you want to delete the
dynamically learnt host table entries.
* Enter * to delete all host table entries.
Defaults None
Command Modes EXEC
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.4.(0.0) Introduced on the S-Series and Z-Series.
Usage Information Use this command to delete one or all dynamically learned host table entries corresponding to a specic
VRF.
Example
Dell#clear host vrf jay dell
Dell#clear host vrf jay *
Dynamic Host Conguration Protocol (DHCP)
525