Service Manual

FIPS mode is enabled or disabled:
3des-cbc: Force ssh to use 3des-cbc encryption cipher.
aes128–cbc: Force ssh to use the aes128–cbc encryption cipher.
aes192–cbc: Force ssh to use the aes256–cbc encryption cipher.
aes256–cbc: Force ssh to use the aes128–cbc encryption cipher.
aes128–ctr: Force ssh to use the aes256–cbc encryption cipher.
aes192–ctr: Force ssh to use the aes128–cbc encryption cipher.
aes256–cbc: Force ssh to use the aes256–cbc encryption cipher.
-l username (OPTIONAL) Enter the keyword —l then the user name used in this SSH session.
The default is the user name of the user associated with the terminal.
-m HMAC algorithm Enter one of the following HMAC algorithms to use. (For v2 clients only.):
Without the FIPS mode enabled:
hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
With the FIPS mode enabled:
hmac-md5: Force ssh to use the hmac-md5 HMAC algorithm.
hmac-md5–96: Force ssh to use the hmac-md5–96 HMAC algorithm.
hmac-sha1: Force ssh to use the hmac-sha1 HMAC algorithm.
hmac-shal-96: Force ssh to use the hmac-sha1–96 HMAC algorithm.
hmac-sha2-256: Force ssh to use the hmac-sha2-256 HMAC algorithm.
hmac-sha2-256-96: Force ssh to use the hmac-sha2-256-96 HMAC
algorithm.
-p port-number (OPTIONAL) Enter the keyword —p then the port number.
The range is 1 to 65535.
-v {1|2} (OPTIONAL) Enter the keyword —v then the SSH version 1 or 2.
The default: The version from the protocol negotiation.
NOTE: If the FIPS mode is enabled, this option does not display in the
output.
Defaults As indicated above.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
FIPS Cryptography
539