Service Manual
Member Ports: Gi 1/17
Dell#
show ip igmp snooping mrouter
Display multicast router interfaces.
Syntax
show ip igmp snooping mrouter [vlan number]
Parameters
vlan number Enter the keyword vlan then the vlan number. The range is from 1 to 4094.
Command Modes
• EXEC
• EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
E-Series legacy
command.
Usage Information If the port channel is a VLT port channel, an asterisk (*) after the port channel number (Po 100*) indicates
the port channel is locally down and that a remote VLT port is up.
Example
Dell#show ip igmp snooping mrouter
Interface Router Ports
Vlan 2 Gi 1/3, Po 1
Dell#
Related Commands
• ip igmp snooping mrouter — congures a static connection to the multicast router.
• show ip igmp groups — view groups.
598
Internet Group Management Protocol (IGMP)