Service Manual
Parameters
name Enter up to 16 characters for the macro name.
interface,
interface,...
Enter the keywords interface range and one of the interfaces — slot/port,
port-channel, or VLAN number. Select the range of interfaces for bulk
conguration. You can enter up to six comma-separated ranges. Spaces are not
required between the commas. Comma-separated ranges can include VLANs, port-
channels, and physical interfaces.
•
For a 1-GigabitEthernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For a Tunnel interface, enter the keyword tunnel then the tunnel ID. The
range is from 1 to 16383.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
Defaults none
Command Modes CONFIGURATION
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
8.2.1.0 Added support for 4093 VLANs on E-Series ExaScale. Prior releases supported
2094.
8.1.1.0 Introduced on the E-Series ExaScale.
7.6.1.0 Introduced on the S-Series.
7.5.1.0 Introduced on the C-Series.
pre-Version 6.1.1.0 Introduced on the E-Series.
Example (Single
Range)
This example shows how to dene an interface range macro named test. Execute the show running-
config command to display the macro denition.
Dell(config)# define interface-range test gigabitethernet 1/1 -3,
gigabitethernet 5/1 -47, gigabitethernet 13/1 -89
Dell# show running-config | grep define
Interfaces
615