Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

671

672

673

674

675

676

677

678

679

680

Command Modes

• EXEC

• EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

Pre-version 8.3.7.0 Introduced on the E-Series ExaScale.

Example

Dell#debug ip udp-helper

UDP helper debugging is on

01:20:22: Pkt rcvd on Gi 5/0 with IP DA (0xffffffff) will be sent on Gi

5/1 Gi 5/2

Vlan 3

01:44:54: Pkt rcvd on Gi 7/0 is handed over for DHCP processing.

Related Commands

ip udp-broadcast-address — congures a UDP IP address for broadcast.

ip udp-helper udp-port — enables the UDP broadcast feature on an interface.

show ip udp-helper — displays the congured UDP helper(s) on all interfaces.

ip udp-broadcast-address

Congure an IP UDP address for broadcast.

Syntax

ip udp-broadcast-address address

To delete the conguration, use the no ip udp-broadcast-address address command.

Parameters

address Enter an IP broadcast address in dotted decimal format (A.B.C.D).

Defaults Not congured.

Command Modes INTERFACE (cong-if)