Service Manual
NOTE: Use this attribute to start a BGP instance for either a specic
address family corresponding to the default VRF or an IPv4 address family
corresponding to a non-default VRF.
interface interface (OPTIONAL) Enter the following keywords and slot/port or number information:
• For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet
then the slot/port information.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
• For the Management interface on the stack-unit, enter the keyword
ManagementEthernet then the slot/port information. The slot range is from
1 to 11. The port range is 1.
• For a port channel interface, enter the keywords port-channel then a
number. The range is from 1 to 128.
• For a VLAN interface, enter the keyword vlan then a number from 1 to 4094.
ip ip-address mask (OPTIONAL) Enter the keyword ip then an IP address in the dotted decimal
format. Enter the optional IP address mask in the slash prex format (/ x).
inspection Enter the keyword inspection with one of the following keywords to view ARP
entries:
• database — view a list of ARP entries learned using DAI
• statistics — view DAI statistics
macaddress mac-
address mask
(OPTIONAL) Enter the keyword macaddress then a MAC address in
nn:nn:nn:nn:nn:nn format. Enter the optional MAC address mask in nn:nn:nn:nn:nn
format also.
static (OPTIONAL) Enter the keyword static to view entries entered manually.
retries (OPTIONAL) Enter the keyword retries to show the number of ARP retries
before a 20–second back o.
dynamic (OPTIONAL) Enter the keyword dynamic to view dynamic entries.
summary (OPTIONAL) Enter the keyword summary to view a summary of ARP entries.
Command Modes EXEC Privilege
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.5.1.0 Added support for 4-port 40G line cards on ExaScale.
724
IPv4 Routing