Service Manual

Field Description
Mac Addr Displays the next-hop router’s MAC address.
Port Displays the egress interface.
• CP = control processor
• Gi = Gigabit Ethernet interface
• Te = 10–Gigabit Ethernet interface
Example
Dell#show ip cam stack-unit 3 po 0 1.1.1.0/24 longer-prefixes
Destination EC C VId Mac-Addr Port
--------------------------------------------------------------------
1.1.1.2/32 0 0 3000 00:05:00:00:00:02 Gi 3/44
1.1.1.1/32 0 1 0 00:00:00:00:00:00 CP
1.1.1.0/24 0 1 0 00:00:00:00:00:00 CP
Dell#
Example (ECMP-
Group)
Dell#show ip cam stack-unit 3 po 0 ecmp-group detail
Destination EC C VId Mac-Addr Port ECMP Group-Index
-------------------------------------------------------------------------------------------
1.1.1.2/32 0 0 1000 00:01:00:00:00:02 Gi 3/42 -
2.1.1.2/32 0 0 20 00:03:00:00:00:02 Po 10 -
2.1.1.1/32 0 1 0 00:00:00:00:00:00 CP -
1.1.1.1/32 0 1 0 00:00:00:00:00:00 CP -
2.1.1.0/24 0 1 0 00:00:00:00:00:00 CP -
1.1.1.0/24 0 1 0 00:00:00:00:00:00 CP -
100.1.1.0/24 1 0 20 00:03:00:00:00:02 Po 10 0
100.1.1.0/24 1 0 1000 00:01:00:00:00:02 Gi 3/42 0
0.0.0.0/0 0 1 0 00:00:00:00:00:00 CP -
Dell#
Example (Member-
Info)
Dell#show ip cam stack-unit 3 po 0 ecmp-group member-info detail
Group Index Member Count Mac-Addr Port VLan ID
--------------------------------------------------------------------------------
0 2 00:03:00:00:00:02 Po 10 20
00:01:00:00:00:02 Gi 3/42 1000
Dell#
show ip b stack-unit
View all Forwarding Information Base (FIB) entries of a specic stack-unit.
Syntax
show ip fib stack-unit id vrf vrf-name [ip-address [mask] [longer-prefixes] | summary]
Parameters
id Enter the S-Series stack unit ID. The unit ID range is from 1 to 6.
vrf vrf-name Enter the keyword vrf followed by the name of the VRF to view FIB entries corresponding to that VRF.
ip-address mask (OPTIONAL) Enter the IP address of the network destination to view only information on that destination. Enter the IP address in
dotted decimal format (A.B.C.D). Enter the mask in slash prex format (/X).
730
IPv4 Routing