Service Manual
Default 3 attempts
Command Modes INTERFACE (management interface only)
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
ipv6 nd dns-server
Congures Recursive DNS Server (RDNSS) addresses to be distributed via IPv6 router advertisements to an IPv6 device.
Syntax
ipv6 nd dns-server {ipv6-RDNSS-address} {lifetime | infinite}
To remove the IPv6 RDSS conguration, use no ipv6 nd dns-server {ipv6-RDNSS-address}
{lifetime | infinite}
Parameters
ipv6-RDNSS-
address
Enter the IPv6 Recursive DNS Server’s (RDNSS) address. You can specify up to 4
IPv6 RDNSS server addresses.
lifetime Enter the lifetime in seconds. The amount of time the IPv6 host can use the IPv6
RDNSS address for name resolution. The range is 0 to 4294967295 seconds.
When you specify the maximum lifetime value of 4294967295 or infinite, the
lifetime does not expire. A value of
0 indicates to the host that the RDNSS address
should not be used. You must specify a lifetime using the lifetime or
infinite parameter.
innite Enter the keyword infinite to specify that the RDNSS lifetime does not expire.
Defaults Not Congured
Command Modes INTERFACE CONFIG
Command History
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000–ON.
9.5(0.0) Introduced on the Z9000, S6000, S4810, S4820T, and MXL..
Usage Information Use this command to add, edit, or delete an IPv6 RDNSS address and lifetime value. You can congure up to
four IPv6 RDNSS addresses. You must specify a lifetime using the lifetime or innite parameter.
768
IPv6 Basics