Service Manual

* Enter the keyword * to clear all IS-IS information and restart the IS-IS process. This

command removes IS-IS neighbor information and IS-IS LSP database information

and the full SPF calculation is done.

database Clears IS-IS LSP database information.

trac Clears IS-IS counters.

Command Modes EXEC Privilege

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

clns host

Dene a name-to-network service mapping point (NSAP) that you use with commands that require NSAPs and system IDs.

Syntax

clns host name nsap

Parameters

name Enter an alphanumeric string to identify the name-to-NSAP mapping.

nsap Enter a specic NSAP address that is associated with the name parameter.

Defaults Not congured.

Command Modes ROUTER ISIS