Service Manual
Version Description
8.3.11.1 Introduced on the Z9000.
7.8.1.0 Added IPv6 ISIS support.
6.3.1.0 Introduced.
Usage Information When you execute this command, IS-IS does not download the route to the routing table if the same route
was redistributed into IS-IS routing protocol on the same router.
domain-password
Set the authentication password for a routing domain.
Syntax
domain-password [hmac-md5 | encryption-type] password
To disable the password, use the no domain-password command.
Parameters
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
password Enter an alphanumeric string up to 16 characters long. If you do not specify an
encryption type or hmac-md5 keywords, the password is processed as plain
text which provides limited security.
Defaults No default password.
Command Modes ROUTER ISIS
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
6.3.1.0 Introduced.
Usage Information The domain password is inserted in Level 2 link state PDUs (LSPs), complete sequence number PDUs
(CSNPs), and partial sequence number PDUs (PSNPs).
Related Commands
• area-password — congures an IS-IS area authentication password.
• isis priority — congures the authentication password for an interface.
Intermediate System to Intermediate System (IS-IS)
799