Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

811

812

813

814

815

816

817

818

819

820

Command Modes INTERFACE

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.12.0 Introduced on the S4810.

8.3.11.1 Introduced on the Z9000.

Usage Information

Hello PDUs are “padded” only when both the global and interface padding options are ON. Turning either

one OFF disables padding for the corresponding interface.

Related Commands hello padding — turns ON or OFF padding for LAN and point-to-point hello PDUs.

isis ipv6 metric

Assign metric to an interface for use with IPv6 information.

Syntax

isis ipv6 metric default-metric [level-1 | level-2]

To return to the default values, use the no ipv6 isis metric [default-metric] [level-1 |

level-2] command.

Parameters

default-metric Metric assigned to the link and used to calculate the cost from each other router

via the links in the network to other destinations. You can congure this metric for

Level 1 or Level 2 routing. The range is from 0 to 16777215. The default is 10.

level-1 (OPTIONAL) Enter the keywords level-1 to congure the shortest path rst

(SPF) calculation for Level 1 (intra-area) routing. This value is the default.

level-2 (OPTIONAL) Enter the keywords level-2 to congure the SPF calculation for

Level 2 (inter-area) routing.

Defaults default-metric = 10; level-1 (if not otherwise specied)