Service Manual
To delete a password, use the no isis password [password] [level-1 | level-2]
command.
Parameters
encryption-type (OPTIONAL) Enter 7 to encrypt the password using DES.
hmac-md5 (OPTIONAL) Enter the keywords hmac-md5 to encrypt the password using MD5.
password Assign the interface authentication password.
level-1 (OPTIONAL) Independently congures the authentication password for Level 1.
The router acts as a station router for Level 1 routing. This setting is the default.
level-2 (OPTIONAL) Independently congures the authentication password for Level 2.
The router acts as an area router for Level 2 routing.
Defaults No default password. level-1 (if not otherwise specied).
Command Modes INTERFACE
Command History
This guide is platform-specic. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.8(0.0) Introduced on the S3048-ON and S4048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.12.0 Introduced on the S4810.
8.3.11.1 Introduced on the Z9000.
Usage Information
To protect your network from unauthorized access, use this command to prevent unauthorized routers from
forming adjacencies.
You can assign dierent passwords for dierent routing levels by using the keywords level-1 and
level-2.
The no form of this command disables the password for Level 1 or Level 2 routing, using the respective
keywords level-1 or level-2.
This password provides limited security as it is processed as plain text.
isis priority
Set the priority of the designated router you select.
Syntax
isis priority value [level-1 | level-2]
Intermediate System to Intermediate System (IS-IS)
815