Service Manual

ManualsBrandsDell ManualsAccess PlatformsPowerSwitch S3048-ON

881

882

883

884

885

886

887

888

889

890

Command Modes CONFIGURATION (conf-lldp) and INTERFACE (conf-if-interface-lldp)

Command History

This guide is platform-specic. For command information about other platforms, refer to the relevant Dell

Networking OS Command Line Reference Guide.

The following is a list of the Dell Networking OS version history for this command.

Version Description

9.8(0.0) Introduced on the S3048-ON and S4048-ON.

9.7(0.0) Introduced on the S6000-ON.

9.0.2.0 Introduced on the S6000.

8.3.19.0 Introduced on the S4820T.

8.3.11.1 Introduced on the Z9000.

8.3.7.0 Introduced on the S4810.

7.7.1.0 Introduced on the S-Series. Added the vlan-name option.

7.6.1.0 Introduced on the C-Series.

7.4.1.0 Introduced on the E-Series.

Related Commands

protocol lldp (Conguration) — enables LLDP globally.

debug lldp interface — debugs LLDP.

show lldp neighbors — displays the LLDP neighbors.

advertise dot3-tlv

Advertise dot3 TLVs (Type, Length, Value).

Syntax

advertise dot3-tlv {max-frame-size}

To remove advertised dot3-tlv, use the no advertise dot3-tlv {max-frame-size} command.

Parameters

max-frame-size Enter the keywords max-frame-size to advertise the dot3 maximum frame

size.

Defaults none